| Customization: | Available |
|---|---|
| Condition: | New |
| Certification: | GS, RoHS, CE, ISO9001 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.The oil pressure circuit design ready for mold close will shorten the cycle time and upgrade productivity.
2. Pressure switch assures the locking strength by mold lock system for far better product.
3.The turn table may run reversibly in case of emergency to eliminate the abnormality and upkeep the safety operation.
4. Furnished with mold air-blowing device, the finished products may be de-molded easily.
5.The reversible turntable in case of emergency will eliminate abnormality and upkeep safety operations.
6. Computerization in analysis and design, the machine is well in stability.
7. Conformed to human engineering in design, it features operational compatibility.
8. It could be equipped with air blowing system and can produce light weight, particularly the need for reinforced cooling effect.
| Machine model | JL-106 | |||
| Mould-clamping Unit | ||||
| Work station | 12/16/20 | |||
| Clamping force | TON | 120 | ||
| Opening stroke | MM | 210 | ||
| Mould dimension | MM | 500*480 | ||
| Height of injection nozzle | MM | 280 | ||
| Injection Unit | ||||
| Injector | SET | 1 | ||
| Screw diameter | MM | 65/70/75 | ||
| Screw L/D ratio | L/D | 20 | ||
| Max.injection volume | cm3 | 650-1000 | ||
| Injection speed | Cm/s | 500 | ||
| Screw rotation speed | R.P.M | 0-200 | ||
| Electricity Consumption | Normal Motor | Servo Motor | ||
| Heating power of injector | KW | 7 | 7 | |
| Hydraulic unit motor | KW | 18.5 | 15.7+7.5 | |
| Total power | KW | 25.5 | 30.2 | |
| Temperature control | Section | 4 | 4 | |
| Power consumption per hour | Kw/h | 15-20 | 7-10 | |
| Dimension and Weight | 16 Stations | |||
| Machine dimension | (L*W*H)MM | 4500*3500*3200 | ||
| Machine weight | KGS | 6500 | ||
| *Note:Above data only for reference. | ||||
){kind=link}